Each luminaire is equipped with two LED modules

The COB LED module

This produces the energy-saving lighting of rooms.

The LED UVC module

Provides the professional disinfection of surfaces and the air in the room.

The LumniCleanse Hybrid UVC LED Light System Comes in White Matt, Black Matt and all RAL colours.

You can choose the lighting mode or the decontamination mode. Both modules operate alternately allowing a dual function use within one light.


Why is the LED UVC more superior compared to the old style artificial UVC radiation sources?

  • no toxic mercury contents
  • a wavelength of light that is more effective in combating pathogens – providing a narrower and more precise range of radiation
  • thanks to the small dimensions – the possibility of implementing LED UV light sources in any type of lighting fixture and lamp and the possibility of easy integration with electronic control systems
  • no ozone production harmful to humans and animals – without needing to ventilate the rooms after the disinfection process is completed
  • precise control of the UVC beam, allowing the calculation of radiation doses necessary for disinfection, helps to achieve greater energy efficiency of the disinfection process and to avoid dynamic photo-degradation of the irradiated materials
  • longer service life of the LED UVC module, low operating costs – no need to periodically replace the radiators


These luminaires can be combined into groups and controlled remotely via mobile devices thanks to the ANNIHILATOR App. This is available free of charge in the Google PLAY Store.

Controllers used in the luminaires are based on BLUETOOTH BLE and WIFI technology.

This function allows:

  • safety regarding who can access and control the ultraviolet UVC radiation
  • white light brightness control
  • cooperation with dedicated wired or wireless sensors which disconnect    radiation when motion is detected
  • setting the time of the disinfection process, the start delay time and the
  • volume of the warning signal
  • change of preferences and administration of a group of luminaires


Currently the only professional hybrid LED luminaire on the market that combats pathogens.

Its effectiveness in inactivating viral and bacterial pathogens has been confirmed by research conducted at the Department of Biotechnology and Food Microbiology at the University of Life Sciences in Wrocław.

The LumniCleanse Hybrid UVC LED Light System owes its effectiveness to a number of technical aspects.

By applying the highest quality UVC LEDs with a semi-conductor chipset from a leading Korean manufacturer in the frame, and thanks to the use of double-cleaned JGS-1 quartz lenses with the appropriate focus, a LED module has been created. This is an extremely effective weapon in the fight against viral and bacterial pathogens.

Carefully selected radiation power of the LumniCleanse Hybrid UVC LED Light System module, with a peak wavelength of 273 nm, causes dynamic destruction and inactivation of pathogenic microorganisms. LumniCleanse Hybrid UVC LED Light System is a viricidal and bactericidal setting, however, with the appropriate exposure time (and the resulting radiation dose), annihilation also destroys single-celled fungi, mould spores, protozoa, mites or algae. Thanks to the multi-point (coming from many individual frames) conical radiation emission, surfaces are decontaminated by rays reaching them at different angles, thus increasing the effectiveness of destroying pathogens located on them, which are caught in the crossfire.

The LumniCleanse Hybrid UVC LED Light System is focused on decontamination of indoor air and surfaces exposed to the probability of prior direct contact with people who are potential carriers of viruses and bacteria.

The key is to decontaminate areas most exposed to contact with pathogens: work surfaces (0.85m above the floor), floors, public devices, tables, chairs, doors and more. However, it should be noted that a well-designed LumniCleanse Hybrid UVC LED Light System provides for disinfection of even the highest parts of walls and the ceiling.

For projects managed by LUMNICLEANSE, we will be able to give you guidance on how many lights you will require according to your room measurements and specifications.  We can design the layout according to the room size and show you how it all works.

The time required for effective surface disinfection ranges from 10 minutes to 6 hours and is specified in detail in each individual simulation provided to the customer. The average time of the UVC disinfection process recommended by LumniCleanse is 3 hours. It should be remembered that the time of disinfection of air penetrated by UVC radiation is much shorter. The effectiveness of combating pathogens present in the air, as a result of direct and continuous ultraviolet radiation, is incomparably greater and more dynamic than the effectiveness of UV flow disinfection lamps and ozonators.

The operation and effectiveness of the LumniCleanse Hybrid UVC LED Light System have been tested in the laboratory of the Department of Biotechnology and Food Microbiology at the University of Life Sciences in Wrocław, on the following pathogens:

  • Bacterial virus P22 ATCC 97540
  • Bacterial virus FELIX01 DSM 18524
  • Gram negative bacteria Escherichia coli BAA 2469 (NDM)
  • Gram negative bacterium Salmonella typhimurium ATCC 140288
  • Gram positive bacterium Staphylococcus aureus ATCC 43300 (MRSA)

Irradiating samples with the above pathogens at a concentration of 1-2 x 10^5 cfu/ml, at a distance of 2.5 meters (time from 20 minutes to 120 minutes), contributed to their reduction by 99.5% – 100%.

Talk to us about your disinfection needs and the LumniCleanse range.


or email us on: [email protected]

or call us on: 020 3026 2881